Wironit Extra-hard

Wironit® extra-hard, the ideal partial denture alloy for combination work
Due to its high proof strength and ultimate strength, this alloy is ideally suited for combination work.
Outstanding casting properties thanks to the special composition with silicon and carbon.
Very low thermal conductivity of the alloy emphasises the wearing comfort of the prosthesis.
Biocompatible and corrosion-resistant.
Type 5: Indicated for prosthetic restorations where parts thereof require a combination of high rigidity and strength, e.g. thin removable partial dentures, sections with thin cross-sections, clasps.
Product details
Composition in % by mass | |
---|---|
Co 63.0 · Cr 30.0 · Mo 5.0 · Si 1.0 · Mn 1.0, C | |
Alloy characteristics | Standard values |
Type (ISO 22674) | 5 |
Density | 8,2 g/cm3 |
Preheating temperature | 950–1 050 °C |
Solidus, liquidus temperature | 1260, 1390 °C |
Casting temperature approx. | 1 420 °C |
Young’s modulus | 185 GPa |
Proof strength (Rp0,2) | 635 MPa |
Ultimate strength (Rm) | 900 MPa |
Elongation after fracture (A5) | 8 % |
Vickers hardness | 385 HV10 |
Availability | REF |
Wironit® Extra-Hard, 1 kg | 50060 |
Accessories | REF |
Wiroweld, Co-Cr laser wire, carbon-free, Ø 0,35 mm | 50003 |
Wiroweld, Co-Cr laser wire, carbon-free, Ø 0,5 mm | 50005 |
Cobalt-chrome solder | 52520 |
Due to its high proof strength and ultimate strength, this alloy is ideally suited for combination work.
Outstanding casting properties thanks to the special composition with silicon and carbon.
Very low thermal conductivity of the alloy emphasises the wearing comfort of the prosthesis.
Biocompatible and corrosion-resistant.
Type 5: Indicated for prosthetic restorations where parts thereof require a combination of high rigidity and strength, e.g. thin removable partial dentures, sections with thin cross-sections, clasps.