Wirofine - universel investment

WiroFine – Universal investment material for all indications in the partial denture and combination technique, for gel or silicone duplication
Can be heated rapidly or conventionally to 1050 °C with ideal expansion values, offers the level of flexibility essential for the modern dental laboratory.
Rapid preheating up to 1000 °C: Insertion temperature = final temperature – means a time saving of 20%–30% in comparison to investment materials which have to be heated from 600 °C.
Ideal flow properties make for reliable, fatigue-free working, since even the finest areas are precisely reproduced.
The precision of the duplicate models, along with high edge strength, makes for an optimal accuracy of fit without timeconsuming finishing – ideal for combination work.
Can be used for all shapes of mould and wax-up geometries: System-independent whilst ensuring reliable, efficient processing.
Excellent deflasking properties thanks to the minimal reaction between the investment material and the alloy. The advantage for you: Time saving and economical use of blasting materials (Korox® 110 μm, REF 46044)
Free selection of duplicating method :
Duplication with gel (e.g., Wirogel® M, REF 54354) results in good model surfaces and cost effectiveness.
Combination with silicone duplication (e.g., Wirosil®, REF 52000) facilitates maximum precision and time savings (no hardening necessary).
Reliable expansion control for excellent fit results thanks to the special liquid BegoSol® K.
Product details
Characteristic values of the material according to DIN EN ISO 15912 | |
Beginning of solidification (Vicat time) | approx. 6 min |
Compressive strength [MPa] | 11 MPa |
Linear thermal expansion [%] | 0,8 % |
Processing time at 20 °C | approx. 3,5 minutes |
Shelf life in unopened bag | 24 months |
Availability | REF |
Wirofine, 45 x 400 g (18 kg) | 54345 |
Wirofine, 30 x 200 g (6 kg) | 54348 |
The packs do not contain any mixing liquid. | |
Accessories | REF |
BegoSol® K mixing liquid*, 1 lt | 51120 |
BegoSol® K mixing liquid**, 5 lt | 51121 |
BegoSol® mixing liquid**, 1 lt | 51090 |
* BegoSol® K is sensitive to freezing ·
** BegoSol® is only suitable for conventional preheating
Can be heated rapidly or conventionally to 1050 °C with ideal expansion values, offers the level of flexibility essential for the modern dental laboratory.
Rapid preheating up to 1000 °C: Insertion temperature = final temperature – means a time saving of 20%–30% in comparison to investment materials which have to be heated from 600 °C.
Ideal flow properties make for reliable, fatigue-free working, since even the finest areas are precisely reproduced.
The precision of the duplicate models, along with high edge strength, makes for an optimal accuracy of fit without timeconsuming finishing – ideal for combination work.
Can be used for all shapes of mould and wax-up geometries: System-independent whilst ensuring reliable, efficient processing.
Excellent deflasking properties thanks to the minimal reaction between the investment material and the alloy. The advantage for you: Time saving and economical use of blasting materials (Korox® 110 μm, REF 46044)
Free selection of duplicating method :
Duplication with gel (e.g., Wirogel® M, REF 54354) results in good model surfaces and cost effectiveness.
Combination with silicone duplication (e.g., Wirosil®, REF 52000) facilitates maximum precision and time savings (no hardening necessary).
Reliable expansion control for excellent fit results thanks to the special liquid BegoSol® K.
Related products
