Varseovest P plus - Investment
Phosphate-bonded, shock heat precision investment material especially for casting 3D-printed partial denture frames
The VarseoVest P plus investment has been specially developed for CAM constructions produced by means of 3D printing and offers an excellent fit and smooth cast objects every single time.
The outstanding flow properties ensure easy investments even on slender partial denture clasps and margins; the long working time of approx. 4:40 minutes enables fatigue-free processing of the investment material.
The mould is inserted directly into the furnace, which is preheated to 900–950°C, only 20 minutes after investing, which represents a considerable reduction in the duration of the heating process.
The impressive strength of the investment material ensures that the moulds do not crack or tear as a result of the plastic expanding and also guarantees reliable further processing.
VarseoVest P plus investment offers a high degree of edge strength yet still permits easy deflasking – for economic use of the blasting material.
The unambiguous and clear expansion control with the special mixing liquid BegoSol® K ensures reproducible fit results.
Simple application thanks to processing techniques comparable to common investment materials.
Product details
Key material values according to DIN EN ISO 15912 | |
|---|---|
Beginning of setting (Vicat time) | approx. 9:50 min |
Compressive strength | approx. 8 MPa |
Linear thermal expansion | 0,9 % |
Flowability | 145 mm |
Working time at 20 °C | approx. 4:40 min |
Shelf life in unopened bag | 24 months |
Availability | REF |
VarseoVest P plus, 72 x 250 g (18 kg) | 54910 |
The packages do not contain any mixing liquid. | |
Accessories | REF |
BegoSol® K mixing liquid*, 1 lt | 51120 |
BegoSol® K mixing liquid*, 5 lt | 51121 |
Silicone mould former | 54877 |
Using VarseoVest P plus coating in combination with VarseoWax CAD/Cast resin is optimal and makes it very easy to use. | |
VarseoWax CAD/Cast, 1 kg | 41000 |
*BegoSol® K mixing liquid is sensitive to freezing.
The VarseoVest P plus investment has been specially developed for CAM constructions produced by means of 3D printing and offers an excellent fit and smooth cast objects every single time.
The outstanding flow properties ensure easy investments even on slender partial denture clasps and margins; the long working time of approx. 4:40 minutes enables fatigue-free processing of the investment material.
The mould is inserted directly into the furnace, which is preheated to 900–950°C, only 20 minutes after investing, which represents a considerable reduction in the duration of the heating process.
The impressive strength of the investment material ensures that the moulds do not crack or tear as a result of the plastic expanding and also guarantees reliable further processing.
VarseoVest P plus investment offers a high degree of edge strength yet still permits easy deflasking – for economic use of the blasting material.
The unambiguous and clear expansion control with the special mixing liquid BegoSol® K ensures reproducible fit results.
Simple application thanks to processing techniques comparable to common investment materials.
