Miditherm 100 MP - preheating furnace

Miditherm 100 MP – Microprocessor-controlled preheating furnace for crowns, bridges and partial dentures

Monitoring of the temperature using a microprocessor in combination with a precision thermocouple ensures that there are no miscasts due to the casting rings being at the incorrect temperature.
Four-zone heating, with a max. temperature of 1,100 °C, guarantees uniform heating of the casting rings and consistent results during casting.
The heating elements are embedded in robust industrial ceramic – for increased reliability and a long service life.
Maximum capacity of the mould chamber:
9 × size 3 mould
4 × BEGO large mould former, blue
Flexible programming with 4 programmable holding stages per programme, infinitely variable selection of the heat rate from 1–9 °C/Min and 1 speed programme reliably covers all applications in CrCo and crown and bridge work.

Technical data
Height	480 mm
Width	350 mm
Depth	420 mm
Weight	approx. 28 kg
Mould chamber Height	100 mm
Mould chamber Width	150 mm
Mould chamber Depth	170 mm
Rated voltage	200–240 VAC, 50/60 Hz
Power at rated voltage of 230 VAC	1 600 VA
Temperature max.	1 150°C
Availability	REF
Miditherm 100 MP, including :	26155
Ceramic base plate for Miditherm 100	13984
Accessories	REF
Thermocouple for Miditherm 100/200 (2)	14087
Extraction pipe for Miditherm 100/200, short	35544
Spare heating mould for Miditherm 100	34956

Monitoring of the temperature using a microprocessor in combination with a precision thermocouple ensures that there are no miscasts due to the casting rings being at the incorrect temperature.
Four-zone heating, with a max. temperature of 1,100 °C, guarantees uniform heating of the casting rings and consistent results during casting.
The heating elements are embedded in robust industrial ceramic – for increased reliability and a long service life.
Maximum capacity of the mould chamber:
9 × size 3 mould
4 × BEGO large mould former, blue
Flexible programming with 4 programmable holding stages per programme, infinitely variable selection of the heat rate from 1–9 °C/Min and 1 speed programme reliably covers all applications in CrCo and crown and bridge work.